The USB-Kon module series has a decentralised organisation for I/O- and MSR-system usable for control puposes with the USB bus. To use the system it needs only a free USB connector. Several modules can be used in parallel, depending on the number of available USB connectors. By using a USB hub even more devices can be used.
The current program
Digital modules
![](https://oktogon.com/wp/wp-content/uploads/2022/03/USB-KON-Ausgangsmodul-OR8.jpg)
Outputmodule OR8
Order No. 570020
8 relay outputs with changeover contacts, connected by plug-in terminals, controlled through USB bus, USB connector type B, powersupply through the USB bus, plastic housing, mountable on DIN rails, Driver software and demo software is supplied
![](https://oktogon.com/wp/wp-content/uploads/2022/03/USB-KON-Eingangsmodul-IN8.jpg)
Inputmodule IN8
Order No. 570022
8 digital inputs, galvanically separated, connected by plug-in terminals, controlled through USB bus, USB connector type B, powersupply through the USB bus, plastic housing, mountable on DIN rails, Driver software and demo software is supplied