external slot expansion
Modern PCs mostly don't have PCI-slots, but only PCI-express slots. Office-PCs can hold often only cards with half height. Here an external solution can help.
USB-KON - eight digital inputs for the USB bus
The next module for the USB-kon module series is an input module with eight galvanically separated input chanels. Only a free
USB-KON - a new controller series for the USB bus
The USB-kon module series is a decentralized I/O-system for control applications with the USB bus. To use the
Software routines are revised
We revise our software routines, that are delivered with the modules and cards. The software for the windows versions for 32-bit addressbus are
16-Bit D/A-converter-module for the system MDP
This 16-bit D/A converter module is a new offer for the Oktogon plugin card system MDP. The new module has up to two D/A outputs. The output voltage
DIO1624PCI - IO card for the PCI bus with galvanic separation
This new designed PCI-card replaces our DIO1624 for the ISA-bus. It's plug
DC-motorcontroller
This motorcontroller can be used for small electric motors with or without rotaryspeed generator. It controls
DC/DC-powersupply module
The module is used to supply additional electronic circuits, e.g. interfaces. It supplies +-15 Volt output voltage and up to 330mA current.
8-bit A/D-converter module
The IC that is used on the existing 8-bit A/D-converter module isn't available anymore, so we
Connectormodule transientsafe
A protection against overvoltage at the inputs of the 12-bit A/D-converter module (Orderno. 559008) can be achieved with this 50-pin module. It's usefull for unipolar as well as bipolar input voltage ranges.
MDP-Basiscard for the PCI bus
The MDP-Basiscard for the PCI-bus can carry up to four MDP-modules. It uses the same modules, that are used for the ISA-Basiscards. There are
12-bit D/A-converter redesigned
The 12-bit D/A-converter module was redesigned. It has
PIO30 - I/O modules for the RS232 interface
The PIO30 modulseries is a decentralised I/O-system for the serial RS232 interface. Only one serial port of the hostcomputer is necessary to use the modules. The modules are connected to one common RS232-cable although meeting the RS232-specifications. Communication is done
A/D-Converter, 12 bit, serial interface
If a laptop is used for the measurement of analog values, or the host computer should not be opened, an external device is the best choice. This is realized by this A/D-Converter. It offers eight
DIO 2882
This universal plugin-card offers eight digital inputs, eight outputs, two counter inputs for rotary shaft encoders and two inputs for ultrasonic
Watchdog module
The module has two timeout-ranges, that are programmable in 64 steps each. A reset of the PC is performed if the timer is not retriggered before it has reached its timeout value. An additional output
WinSPS Version 1.5
Very useful features have been added to WinSPS. Besides the existing program input as command list (AWL), you now can use function plan
Stepmotor-module and Opto-Stepmotor-module
The microcontroller originally used was cancelled by its manufacturer Hitachi and is therefore no more available. It is replaced by a fast microcontroller of